In this article we will see all the possible Tips for a faster and more stable internet connection. It often happens that we want to upload or load files, watch a movie or a series or even work and study from our PC, but the Internet plays a trick on us. It is very common for this to happen since the Internet connection is usually crossed by different factors that alter its speed.
Below we will give you some tips for a faster and more stable Internet connection that you should keep in mind if you want to enjoy an online life without interruptions and with the best possible speed. Having a A good connection is essential to carry out our daily activities without problems. Let's get to it, once again, in Tecnobits.
Your router should be placed in a strategic location
The location of your router has a significant impact on the quality of the signal. If you have it hidden in some corner or under your bed, or perhaps surrounded by objects, the signal will have a harder time reaching port and supplying your entire home with the best connection. That's why you should relocate the router strategically and ensuring that the signal can reach all rooms and corners of the house equally.
Some tips for a faster and more stable Internet connection that you should keep in mind:
- Place the router in the center of your home or very close to the areas where you use it most.
- Avoid placing it near other devices that may interfere with the signal, such as a microwave.
- Find an elevated position so that Wi-Fi waves are not obstructed and can spread throughout the room.
You should always update the router firmware
Firmware is the software that your router uses to control its operation. It is very common for manufacturers to release some updates to improve their stability. and provide its users with greater security and speed on the devices they use.
That's why updating the firmware can solve performance problems and ensure a more stable connection. It can be said that it is one of the best tips for a faster and more stable Internet connection.
This is one of those tips for a faster and more stable internet connection that not many people tell you about. Below we will give you step by step how to update the router firmware.
- Enter the router settings using the IP address. It is usually a sequence of numbers similar to the following: 192.158.3.2.
- Find the firmware update section and follow the instructions to install the latest available version.
But don't worry, we still have more tips for a faster and more stable Internet connection. Let's move on to the next one.
5GHz networks can ensure a more stable and faster connection
If you have a dual-band router, you probably have the option of connecting to a 2.4 GHz network and a 5 GHz network. The 2.4 GHz band is much more prone to interference and has a much slower speed. In contrast, the XNUMX GHz network is much faster than the XNUMX GHz band. 5 GHz offers faster and more stable connections. This is an ideal network for carrying out activities such as streaming and online video games.
This can be easily verified from your devices. Just check the available Wi-Fi networks to see if your 2.4 GHz or 5 GHz network exists. It is always important that you connect to the latter option.
Important clarification: 5 GHz network has a shorter range, so it is essential that you place the router close to your device. That is why if you need to cover more distant areas, you should use the 2.4 GHz band. The number of devices can interfere with the stable and fast connection you need.
The more devices you have connected to the same network, the more bandwidth it will consume and therefore the less speed there will be to share between them all. This will slow down the connection and make everything more unstable, especially during peak hours.
For that, it is important disconnect devices that you are not actively using and set devices to automatically connect when not in use.
Reducing the number of devices connected to the same network is one of the great tips for a faster and more stable internet connection.
Restarting the router never hurts
This is much simpler than it sounds. Occasionally restarting your router can improve performance, especially if it has been used for long periods of time.
Turn off the router for 10-15 seconds and then turn it back on. You can also schedule an automatic reboot if your router has this option.
Use an Ethernet cable for important devices
If you need a stable and high-speed connection for some specific devices such as a PC or a gaming console, you should consider using a cable. Ethernet instead of Wi-Fi. Every device has an Ethernet port, especially if it's a Windows PC. You just plug it into the port and that's it, then the magic will happen by itself.
Install a Wi-Fi signal repeater
If you have areas in your home with a somewhat low signal, or what specialists call "low zones", where the Wifi does not reach, you should consider it a good option place a signal repeater at an intermediate point between the router and the area where you need to improve the signal.
To do this, you need to adjust its location and maximize coverage in hard-to-reach areas. Signal extenders Wi-Fi They are very useful in very large homes or spaces with thick walls that block signals.
We hope that all these tips for a faster and more stable Internet connection have been useful to you. But just in case, we leave you this guide of Tecnobits about How to access my router, may be of help to you in this process.
Passionate about technology since he was little. I love being up to date in the sector and, above all, communicating it. That is why I have been dedicated to communication on technology and video game websites for many years. You can find me writing about Android, Windows, MacOS, iOS, Nintendo or any other related topic that comes to mind.