How to fix battery issues on Nintendo Switch 2

Since its launch, the Nintendo Switch 2 has generated very positive reviews. However, It has not been free of some technical glitches. that have affected a portion of users. One of the most common is related to the battery: either due to a seemingly reduced duration or because the The percentage indicated in the interface does not match the actual load.This has generated confusion and concern among players who do not know if their console has a defect or is simply a software error.

The truth is that, as Nintendo itself has confirmed, The problem is not with the battery itself, but with how the system interprets and displays its charging status.. That is, you could be playing for hours and the system would indicate that you only have 5% left, when in reality you still have plenty of battery life left. Fortunately, There are several ways to fix this error or at least reduce it considerably.

Why is the battery indicator on the Switch 2 out of adjustment?

Most of the problems associated with the Switch 2 battery are not related to a physical failure, but rather to a mismatch in its calibration. These types of errors may appear especially if the console has been stored for a long time before use, or if the option to protect the battery by limiting its charge to 90%For more details on how to manage battery life, you can check this Article on how to save battery life on Nintendo Switch.

Additionally, in some models, Even though the console is charging for hours, it still shows a fixed percentage like 86% or 87% with no apparent changes.In these cases, it is most likely that the fault is in the measurement software and not in the battery itself yes.

Quick Fix: Enter Hidden Recovery Mode

One of the easiest methods to correct this problem is to access the Recovery Mode. This is a hidden menu that is not visible to the traditional user, but allows automatically reset the battery reading. It's not about performing any operations from this mode, just accessing it and exiting it.

Steps to access:

• Make sure your console is completely turned off (not in sleep mode).
• Press and hold the buttons increase volume (+) y decrease volume (-).
• While holding them down, press the power button. power on one time.
• Do not release the volume buttons until the Recovery Mode menu appears..
• Once inside, turn the console off again by holding down the power button for a few seconds.

This process resets the battery measurement system without the need for any internal changes.

What if the problem persists? Advanced calibration method

If you are still experiencing incorrect battery readings after entering Recovery Mode, there is a more in-depth and time-consuming method to completely recalibrate your Switch 2 batteryThis process requires running several charge and discharge cycles, and although it takes time, it is usually very effective. Keep in mind that The original Switch also had similar flaws., you can check how to solve the problem battery saving on Switch.

Before starting:

• Turn off the option “stop charging at 90%” from Settings > Console.
• Make sure you have the latest version of the system installed.
• Configure the three options of automatic suspension in “Never” (both in TV, laptop and multimedia playback mode).

Steps of the complete method:

1. Connect the console directly to the official power adapter and charge it to 100% (or for at least 3 hours).
2. Leave it plugged in for an additional hour without using it.
3. Disconnect the charger and keep the console on in the HOME menu for 3-4 hours to drain the battery the maximum possible.
4. turn off the console completely and let it rest for at least 30 minutes.
5. Repeat the whole process 3 to 6 times so that the battery indicator adjusts progressively.

What to do if none of the above works

If after repeating all the steps above your Switch 2's battery meter still fails, Your console may need a technical inspection or repair.Nintendo recommends performing a technical diagnosis if the error persists after performing multiple calibration cycles and you continue to experience unexpected shutdowns or incorrect readings without improvement.

In these cases, contact the Nintendo Customer Service in your region and provide as much detail as possible about the battery's performance, the steps you followed, and the results obtained.

Remember that the battery, like any component, degrades over time., especially if used intensively or if good charging practices are not followed, such as keeping it between 20% and 80% most of the time or avoiding constant full discharges.

The Nintendo Switch 2 has proven to be a powerful and reliable console, but some software and configuration settings can cause inconsistencies in the battery reading. By following these steps, Most users have managed to correct the fault without having to go through repairs.A little patience throughout the entire process, along with the use of recommended accessories, will make the difference between an unstable battery and a properly calibrated one.

Alberto navarro

I am a technology enthusiast who has turned his "geek" interests into a profession. I have spent more than 10 years of my life using cutting-edge technology and tinkering with all kinds of programs out of pure curiosity. Now I have specialized in computer technology and video games. This is because for more than 5 years I have been writing for various websites on technology and video games, creating articles that seek to give you the information you need in a language that is understandable to everyone.

If you have any questions, my knowledge ranges from everything related to the Windows operating system as well as Android for mobile phones. And my commitment is to you, I am always willing to spend a few minutes and help you resolve any questions you may have in this internet world.